Skip to main content

Introduction

Working on Skelestruder is much easier than the stock extruder due to its highly modular build.

  1. Simply remove Omega cooler and you have great access. Tip: loosen fan screw to help remove Omega.
    • Simply remove Omega cooler and you have great access.

    • Tip: loosen fan screw to help remove Omega.

    • Note that all the embedded sq nuts have an access hole somewhere nearby to enable pushing out using a small hex wrench or similar fine point.

Finish Line

JLTX

Member since: 05/23/2019

1,286 Reputation

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 3

All Time: 908