Pending Edits to 5. Software Changes
Step #4 edited: [Step edited]
Edited by Troy (1)
(You don’t have enough reputation to patrol this edit.)
| [title] Firmware changes | |
| [* 1] You can also change the E steps permanently in the Firmware. This also allows for more fine tuning | |
| [* 1] The unload needs adjustment because the distance from the gears to nozzle is shorter. So need to move it less and slower to allow tip to cool. | |
| [* 1] You can use a [[Skelestruder Information|Patch file]] from the supplemental information page. Apply directly or read it as guide of things to change | |
| [* 10] That patch also adds optional changes: nozzle preheat menu item, lowers E motor current, turns off forcing self-test, increases acceleration and feed limits. | |
| - | [* 10] Helpful user also maintaining patches on [https://github.com/tprelog/ |
| + | [* 10] Helpful user also maintaining patches on [https://github.com/tprelog/my_prusa_files|GitHub]. May be more current than mine at times, so check there too. |
| [* 9] If you are using indirect filament sensor (not hybrid), you need to flip a sign in the firmware to correct the direction. See patch file link above, at end of file. |